Geräte Informationen:

Yaesu FT-5100 Transceiver
Modell: FT-5100
Datum: 1992
Kategorie: Funk und Kommunikation
Gruppe: Transceiver
Beschreibung: Dual-Band 2m/70cm Mobile Transceiver
                                    The FT-5100 is a mobile dual-receive and cross-band full
duplex amateur transceiver descending directly from the
FT-5200, including most of its features and adding some of
its own. Miniaturization technology allows a built-in
antenna duplexer, dual full-frequency liquid crystal display
(with signal strength bargraph for each display channel),
8-level automatic display/button lighting dimmer, and now
dual receive capability on two channels on different bands,
or in the same band. An efficient thermally-switched cooling
fan allows up to 50 watts VHF and 35 watts UHF output.

Ninty-four freely tunable memories (forty-seven per band)
offer complete programmability and scanning functions, such
as independent transmit and receive frequencies,
programmable repeater offsets and two scan ranges on each
band, selectable scan resume modes and memory skip, priority
monitoring and 1-touch instant-re-call CALL channels for
each band. Channel steps are user-selectable, and Automatic
Repeater Shift can be activated to automatically set
standard repeater shifts when tuning to repeater subbands
(where applicable). Versions are available with microphone
button control of a 1750-Hz burst generator (with the
MH-26d8 or MH-26e8 Speaker/Mic), VFO/memory or band selection.

The MW-1 Wireless Microphone/Controller option duplicates
the controls (including volume and squelch), adding a dtmf
(Dual-Tone, Multi-Frequency) keypad and microphone. You can
select a 3-digit ID code and your receiver stays quiet until
your code is received (from any DTMF-equipped transceiver).
You can also have a code open the squelch or a ring like a
telephone. PAGE mode displays the caller’s code so you know
who is calling. One-touch paging transmits paging codes
whenever the PTT switch is pressed, if desired. Four banks
of seven 3-digit code memories each store your ID plus that
of the calling station and those of five other stations or
groups for calling/monitoring (autopatching requires the
MH-26F8 or MH-27b8 DTMF keypad microphone, or the MH-15d8
with its own auto-dial dtmf memories). A 38-tone
programmable CTCSS (Continuous Tone-Coded Squelch System)
encoder is built-in, and CTCSS tone squelch operation on
both receiving channels is available with the FTS-22 Dual
Band CTCSS Decoder option, which also provides a
telephone-type CTCSS Bell alerting function.

Folgende Anleitungen sind für obiges Gerät verfügbar:

Yaesu -- FT-5100 -- Bedienungsanleitung
Dateiname: Yaesu-6220-Manual-Page-1-Picture
Dokumenttyp: Bedienungsanleitung
Seitenanzahl: 41
Dateigröße: 2.14 Mbytes (2242035 Bytes)
Sprache: Englisch
Datum: 1992
Qualität: Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
MD5: ee70370df0fff90dbd38ed222da86c59
ed2kID: 1b39f4ccce6e6ead128b40fd586189dc
Downloads: 186 seit 27 Juli 2014
Accessories.................	.....1
Specifications ...............	.....2
Front Panel Controls...........	.....3
Rear Panel Connectors..........	.....6
Installation.................	.....7
Antenna Considerations	7
Mobile Installation	7
External Speakers	9
Other Mobile Accessories	9
Base Station Installation	9
Operation..................	. . . . 10
Preliminary Setup	10
Important Terms	11
Squelch Setup	12
Main Channel Band Selection	13
Frequency & Step Selection	13
Dual-Channel Receive	13
Selective Channel Receiver Muting	15
Single-Band/Dual-Channel Functions	15
Transmitting	15
Repeater Splits	16
Setting Standard Repeater Offset	17
Automatic Repeater Shift	17
Storing Memories	18
Recalling Memories	19
Alternating Band Memory Selection	19
Call Channel Memories	20
Separate Transmit Frequency Memories	20
Memory Tuning	21
Hiding and Erasing Memories	21
Scanning	21
Memory Skip Scanning	22
Programmable Subband Limits	22
Priority Channel Monitoring	24
CTCSS (Subaudible Tone) Operation	25
CTCSS Bell Paging with the FTS-22	26
DTMF Paging & Code Squelch	27
DTMF Code Squelch	27
DTMF Paging	28
Storing Code Memories	29
Responding to a DTMF Page, and Resetting	3Q
In Case of Problems.............	32
Resetting the CPU	33
Memory Backup...............	33
Memory Cloning ..............	34
Packet Radio TNC Interconnections ....	35
FTS-22 Tone Squelch Unit Installation . .	36
Kostenlos herunterladen


Noch keine Kommentare vorhanden.

Kommentar Hinzufügen

* Pflichtfeld
(wird nicht veröffentlicht)
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
What is the opposite word of weak?
Die Antwort lautet:
Informiere mich via E-Mail über neue Kommentare.
Meine Daten auf diesem Computer.
Powered by Commentics