Geräte Informationen:

Taylor Electrical Instruments Windsor Model 66A Generator
Hersteller:
Taylor Electrical Instruments
Modell: Windsor Model 66A
Datum:
Kategorie: Messgeräte
Gruppe: Generator
Beschreibung: R.F. Signal generator
Informationen:
                                    This instrument is a general purpose R.F. Signal Generator
of advanced design. It covers a very wide frequency range
and is suitable for professional work on both radio and
television receivers. Special attention has been paid to
attenuation, and the unwanted external radiation is
extremely low, due to the efficient double screening and
careful filtration.
The R.F. oscillator uses a triode in a Hartley circuit on
the first 5 ranges but on the 6th range this becomes a
Colpitts oscillator. Low impedance pickup coils are loosely
coupled to the oscillator coils. Owing to the loose coupling
and the fact that these coils are separately switched there
is negligible frequency shift when the attenuator setting is
altered. Modulation at 400 cycles to a depth of 30 per cent,
is effected by another triode Hartley oscillator.

Folgende Anleitungen sind hier verfügbar:

Taylor Electrical Instruments -- Windsor Model 66A -- Service- und Bedienungsanleitung
Dateiname: Taylor-6082-Manual-Page-1-Picture
Dokumenttyp: Service- und Bedienungsanleitung
Seitenanzahl: 11
Dateigröße: 350.91 Kbytes (359328 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer:
Datum:
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: 6eb8bcd10fa6433cb5ad43f2b48a0a98
Downloads: 145 seit dem 25 Mai 2014
Informationen:
CIRCUIT DIAGRAM
....................................................
............... 2
1. DESCRIPTION.
1/1. General ... ... ... ............... ... ... 4
1/2. Controls ... ........................................
............... 4
1/3. Frequency Ranges ...............
........................................4
1/4. Terminating Unit ... ... ... ... ... ... 5
1/5. Output Voltage ... ... ... ... ... ... 5
2. OPERATION.
2/1. Mains Adjustment ... ... ............... ... ... 5
2/2. Connection to Receiver ... ... ... ... ... 6
,p-
3. APPLICATIONS.
3/1. General ............... ... ... ... ... ... 7
3/2. Alignment and Ganging ... ... ... ... ... 7
3/3. Sensitivity Measurements ... ... ............... ... 8
3/4. Selectivity Measurements ... ... ... ............... 8
4. SERVICE.
4/1. Valve Replacement ... ... ... ... , ............... 9
APPENDIX—Wavelength/Frequency Conversion Chart ...............10
GUARANTEE
..........................................................................................11
Taylor-6082-Manual-Page-1-Picture
Kostenlos herunterladen


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Type the numbers for four hundred seventy-two.
Powered by Commentics