Geräte Informationen:

Leader LBO-308S Oszilloskop
Hersteller:
Leader
Modell: LBO-308S
Datum:
Kategorie: Messgeräte
Gruppe: Oszilloskop
Beschreibung: Dual trace Oscilloscope
Informationen:
                                    The model LBO-308S is a high-quality dual-trace, 20-MHz
portable oscilloscope ideally suited for field service. It
is an extremely compact, lightweight, general-purpose
instrument, designed to provide accurate signal measurements
for either bench or field service. The highly sensitive
vertical amplifier provides calibrated deflection
sensitivity from 2 mV/div to 10 V/div. The time base
provides stable triggering over the full bandwidth of the
vertical amplifier as well as calibrated sweep speeds from
0.2 sec/div to 0.5 µsec/div. A times 5 magnifier extends the
maximum sweep speed to 0.1 µsec/div.

The instrument may be operated from either 117/234 volts AC,
11 to 30 volts DC, or from battery pack.

The model LBO-308 features a 3-inch rectangular 8 X 10
division CRT, mounted horizontally, with an internal
graticule which provides for accurate and sharp displays at
any viewing angle without parallax errors.

Folgende Anleitungen sind für obiges Gerät verfügbar:

Leader -- LBO-308S -- Service- und Bedienungsanleitung
Dateiname: Leader-5693-Manual-Page-1-Picture
Dokumenttyp: Service- und Bedienungsanleitung
Seitenanzahl: 68
Dateigröße: 10.08 Mbytes (10568551 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer:
Datum:
Qualität: Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
MD5: 89812c02ac34053256a280b048e04ae4
ed2kID: 95224c031cd0b6d14eee4100b352d057
Downloads: 517 seit 04 April 2014
Informationen:
Leader-5693-Manual-Page-1-Picture
Kostenlos herunterladen


Leader -- LBO-308S -- Service- und Bedienungsanleitung
Dateiname: Leader-9525-Manual-Page-1-Picture
Dokumenttyp: Service- und Bedienungsanleitung
Seitenanzahl: 68
Dateigröße: 10.08 Mbytes (10568551 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer:
Datum:
Qualität: Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
MD5: 5166d5902c572341aef26051561925a2
ed2kID: f2db0e51a1e88dad5f23a05563bc8195
Downloads: 6 seit 12 September 2017
Informationen:
1,	GENERAL
INFORMATION...........................................- • •	I

1-1 INTRODUCTION
..................................................... •	1

1-2	SPECIFICATIONS
............................................................1

2.	OPERATING INSTRUCTIONS
............................................	3

2.-1 FUNCTION OF CONTROLS, CONNECTORS, AND
INDICATORS.................. . . .	3

2-1-1 Display Block. . . . .
......................................................3

2-1-2 Vertical Amplifier
Block.....................................................3

2-1-3 Sweep and Trigger
Block..........................................................................................4

2-1-4
Miscellaneous.........................................................................................................5

2-2	INITIAL OPERATION
..............................____.................	5

2-2-1 Power Connections and Adjustments . . .
................................ . .	5

AC
operation................................................. .
. . .	5

DC
operation...........................................................................................7

LP-2054 battery pack......
..............................................7

2-2-2 Installation
......................................................	7

2-2-3 Preliminary Control Settings and Adjustments
.....................................................7

2-3 BASIC OPERATING PROCEDURES
...............................................................8

2-3-1 Singnal
Connections..............................................................8

2-3-2 Single-trace Operation
...............................................	9

2-3-3 Triggering
Alternatives....................................................................................9

Trigger mode selection. .
...............................................................9

Trigger source
options...............................................	10

Trigger point selection.
..............................................	10

2-3-4 Probe Compensation and
Use..................................................12

2-3-5 Dual-trace Operation. . .
............................................ .	12

2-3-6 Additive and Differential Operation
......................................	14

2-3-7 X-Y Operation
....................................................	15

2-3-8 Intensity Modulation.
...............................................	15

2-4 MEASUREMENT APPLICATIONS .
_____....____............................	15

2-4-1 Amplitude
Measurements............................................ .	15

Peak-to-peak voltages
...............................................................................15

Instantaneous voltages.
..................................................................................16

2-4-2 Differential Measurement
Techniques.....................................	16

2-4-3 Time Interval
Measurements...........................................	16

Basic
technique...............................................................16

Period, pulse width, and duty cycle
......................................	17

Lead and lag
time..................................................	.18

2-4-4 Phase Difference Measurements19

Dual-trace method
....................................................................................19

Lissajous pattern method
............................................	19

2-4-5 Distortion Comparison.
......................................................................................20

2-4-6 Frequency
Measurements.......................................................20

Reciprocal
method.............................................. . . .	20

Comparison method
................................................	21

2-4-7 Risetime Measurements
..................................... . . ........22
3. PERFORMANCE CHECK
......................................................23

3-1 INTRODUCTION
................................................................................23

3-2 TEST EQUIPMENT REQUIRED...........-.................. ■
....................23

3-3 PRELIMINARY
PROCEDURE......................................•............23

3-3-1 Equipment Preparation
........................................................23

3-3-2 Initial Control
Settings.......................................................23

3-4 DEFLECTION ACCURACY
......................................................24

3-4-1 Equipment
Required................................................................^4

3-4-2 C 1:1-1 and CH-2 Deflection Accuracy
.....................................	24

3-4-3 X-axis
Gain............................................................24

3-5 BANDWIDTH . ............................
...............................24

3-5-1 Equipment Required............
.............................................24

3-5-2 CH-1'and CH-2 Bandwidth
............................................	24

3-5-3 X-Axis Bandwidth. . . .
...........................................................................................25

3-6 TRIGGERING
................................................................................25

3-6-1 Equipment
Required......................................................25

3-6-2 50-Hz Triggering.
.............................................-..........25

3-6-3 20-MHz
Triggering..................................................................................................25

3-6-4 Z-Axis Modulation . . . .
..................................................27

3-7 SWEEP TIME ACCURACY
...............................................................................27

3-7-1 Equipment Required
..............................................................................27

3-7-2 Sweep Time Accuracy ..........
.........................................................................27

3-7-3 Magnified Sweep
Accuracy...................................................27

3-8 TV TIGGERING.
.................----.................................	28

3-8-1 Equipment
Required.....................................................28

3-8-2 TV Sync
Triggering...........................................................28

3-9 X-Y MODE DIFFERENCE •
.....................................................................28

3-9-1 Equipment
Required................................................................28

3-9-2 Phase
Measurement.................................................	28

4, ADJUSTMENT AND CALIBRATION PROCEDURES
.........................	30

4-1. PREPARATION
.........................................................................................30

4-1-1 Test Equipment and Tools .
.........................................................................30

4-1-2 Disassembly.
.....................................................	30

4-1-3 Warmup and Preliminary
Set-up............................................................................30

4-2 POWER. SUPPLY . „ .
.......................................
.......................30

4-2-1 Voltage Checks and Adjustments	30

4-2-2 Battery Lower-Limit
Adjustment.......................................................31

4-2-3 Charge Rate Adjustment
.................................................................31

4-3 DISPLAY
CIRCUITS....................................................	31

4-3-1 Blanking
Circuits....................................................................................................31

4-3-2 Intensity Range
Adjustment..............................................3.1.

4-3-3 Geometry
Adjustment...............................................	31

4-3-4 Astigmatism
Adjustment..............................................................................32

4-3-5 Z-Axis Modulation. Check. . . . .
..............................................................32

4-4 VERTICAL AMPLIFIER
.....................................................................................33

4-4-1 Step Attenuator Balance Adjustment
.....................................	33

4-4-2 Balance
Adjustment................................................................................................33
4-4-3 ADD Ba.lao.ce Adjustment.........

44-4 Output Amplifier Adjustments.....

44-5 Gain Calibration ..............

44-6 Step Response and Frequency Check. .

4-5 TIMEBASE ...................

4-5-1. TIME/DIVCalibration. . . . .......

4-5-2 Horizontal Position Centering ......

4-5-3 Sweep Length. Adjustment ........

4-6 TRIGGER CIRCUIT .................

4-6-! LEVEL Balance Adjustment. ......

4-6-2 Trigger Sensitivity Checks. ........

4-7 X-Y CIRCUITRY ....................

4-8 CALIBRATION ...................

REPLACEMENT PARTS LIST ........

BLOCK DIAGRAM AND SCHEMATICS
Leader-9525-Manual-Page-1-Picture
Kostenlos herunterladen


Kommentare

Noch keine Kommentare vorhanden.

Kommentar Hinzufügen

* Pflichtfeld
(wird nicht veröffentlicht)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Enter the third letter of the word castle.
 
Die Antwort lautet:
 
Informiere mich via E-Mail über neue Kommentare.
 
Meine Daten auf diesem Computer.
 
 
Powered by Commentics