Geräte Informationen:

Skanti R5001 Receiver
Hersteller:
Skanti
Modell: R5001
Datum:
Kategorie: Funk und Kommunikation
Gruppe: Receiver
Beschreibung: SSB Receiver
Informationen:
                                    The R5001 marine and general purpose receiver is designed
for use in a marine main radio station. The receiver has
synthesized operation in the frequency range 10 kHz to
29,999.9 kHz.

The receiver is designed for reception of type F1, A1, A2,
A2H, A3, A3H and upper-si-deband A3A and A3J signals. It is
fully transistorized, and widespread use is made of
integrated circuits. These features, in connection with
thefactthat no crystal ovens are used, cause the receiver to
be ready for operation immediately after having been swiched on.

Depending on the power pack installed in it, the receiver
can be powered from a 24 V battery or from AC voltages
normally occurring in practice.

The dimensions match a 19-inch standard rack.

Because we are constantly processing the experience gained
during the produc-tionand operation of ourequipment, it is
possible for minor modifications to occur relative to the
information given in this instruction manual. Wherever
practicable, however, any corrections will be listed on a
correction sheet at the back of the front cover of this manual.

Folgende Anleitungen sind für obiges Gerät verfügbar:

Skanti -- R5001 -- Service- und Bedienungsanleitung
Dateiname: Skanti-5312-Manual-Page-1-Picture
Dokumenttyp: Service- und Bedienungsanleitung
Seitenanzahl: 151
Dateigröße: 5.74 Mbytes (6017642 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer:
Datum:
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: 84d19cc831af7577995a72a0cfe93cd9
ed2kID: a532f0e7d07ea818ec48efd6804c6024
Downloads: 286 seit 12 Januar 2014
Informationen:
1.	INTRODUCTION	1- 1

2.	OPERATING INSTRUCTIONS	2- 1
2.1.	Tuning to 500 kHz and 2182 kHz	2-
2.2.	Tuning to an A1, F1 or SSB Station in the Preselector
Range	2-
2.3.	Tuning to an F1 or SSB Station in the Duplex Ranges	2-
2.4.	Tuning to an AM Station	2-
2.5.	Operating Controls and Their Functions	2-
INSTALLATION		3-
3.1.	Mounting the Cabinet	3-
3.2.	Disassembling the Receiver	3-
3.3.	Connection to the Permanent Installation	3-
3.4.	Earth Connection	3-
3.5.	Antenna	3-
3.6.	Exchanging the Input Impedance	3-
3.7.	Remote Speaker	3-
3.8.	Muting	3-
3.9.	Replacement of Power Packs	3-

4.	TECHNICAL DATA	4- 1

5.	TECHNICAL DESCRIPTION	5- 1

5.1.	Mechanical	5- 1

5.2.	Circuit Description, General	5- 1

5.3.	Circuit Summary, Signal Path	5- 1

5.4.	Circuit Description, Signal Path Boards	5- 2

5.5.	Circuit Summary, Frequency Synthesizer	5- 4

5.6.	Circuit Description, Frequency Synthesizer	5- 5

5.7.	Circuit Summary, Frequency Selection	5- 7

5.8.	Circuit Description, Frequency Selection	5- 8

5.9.	Circuit Summary, P 5010, 24V DC Power Pack	5-10

5.10.	Circuit Description, P 5010, 24V DC Power Pack	5-10
5.11.	Circuit Summary, P 5011, AC Power Pack	5-11

5.12.	Circuit Description, P 5011, AC Power Pack	5-11

5.13.	Circuit Summary, P 5012, 24 V DC/AC Power Pack	5-11

5.14.	Cicuit Description, P5012, 24V DC/AC Power Pack	5-12

6.	SIMPLE SERVICE	6- 1

6.1.	Incorrect Operation	6- 1

6.2.	Battery	6- 1

6.3.	Replacement of Fuses	6- 1

7.	REPAIR AND ALIGNMENT	7- 1

7.1.	Introduction	7- 1

7.2.	Cross Slot Screws	7- 1

7.3.	Locating Subunits and Components	7- 1

7.4.	Locating Faults	7- 1

7.5.	Test Points	7- 1

7.6.	AC Voltages	7- 1

7.7.	DC Voltages	7- 2

7.8.	Typical Sensitivity Levels	7- 2

7.9.	Adjustments	7- 2

7.10.	Realignment of Input Filters /202 or /216	7- 3

7.11.	/203 Realignment of 2nd Mixer and Clarifier
Oscillator	7- 6

7.12.	/205 Realignment of IF Amplifier Detector and AGC	7- 6

7.13.	/220 Realignment of AF Amplifier	7- 7

7.14.	/220 Frequency Adjustment of the TCXO	7- 7

7.15.	/209 Realignment of VCOi and VCO2	7- 7

7.16.	/208 Realignment of Loop Translator	7- 8

7.17.	/210 Realignment of VCOs	7-9
8.	PARTS LISTS AND CIRCUIT DIAGRAMS	8- 1

8.1.	Numbering	8- 1

8.2.	Switches	8- 1

8.3.	Terminals	8- 1

8.4.	Voltages	8- 1

8.5.	Test Points	8- 1

8.6.	Symbol Explanation	8- 1

8.7.	Abbreviations	8- 4

8.8.	Parts List	8- 5

8.9.	Diagrams	8-50
Skanti-5312-Manual-Page-1-Picture
Kostenlos herunterladen


Kommentare (1)

Thema: Skanti R5001
Sort
0/5 (0)
Facebookdel.icio.usStumbleUponDiggTechnoratiGoogle+RedditMySpaceTwitterLinkedIn
Gravatar
TARUN KANTI RAY sagt...
my receiver is not working.
23 Juni 2015 16.59
Seite 1 von 1

Kommentar Hinzufügen

* Pflichtfeld
(wird nicht veröffentlicht)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
What is the day after Friday?
 
Die Antwort lautet:
 
Informiere mich via E-Mail über neue Kommentare.
 
Meine Daten auf diesem Computer.
 
 
Powered by Commentics