in german/auf Deutsch


BASEDEV=Print01.sys

Updated

Provides support for your parallel ports LPT1, LPT2 and LPT3 on PCs with ISA or PCI buses.

BASEDEV=Print01.sys parameter

Parameter:

  • /IRQ

    This parameter change the transmission method from polling to interrupt. The interrupt method is faster but won't work on every system.
    The used IRQ depends on the I/O address the LPT-port uses. IRQ 5 is used on LPT ports installed on the I/O address 278, IRQ 7 is used on LPT ports installed on the I/O address 378 or 3BC. To find out the I/O address of a LPT port use the Hardware-Manager.


Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0
Yes Yes Yes


Basedev Statements
Parallel port drivers
  <<< Previous
Config.sys Home
Next >>>  


Last modified 13 Mar 2000 by Oliver Poggensee at op@opweb.de. - This page can be found from http://www.opweb.de/en/csdp/BASEDEV_Print01_sys.htm
Copyright © 1998-2000 Oliver Poggensee